inconel 625 zatvarači u niklu

Dom »  Proizvodi »  Učvršćivač od legure nikla »  inconel 625 zatvarači u niklu

No.71-625 pričvrsni zatvarači u niklu

625 inconel fasteners in nickel

In what form is nickel alloy Inconel 625 available at SOONV?

Pipe & Tube (welded & seamless)

Koje su karakteristike Inconela 625?

Visoka čvrstoća puzanja
Otpornost na oksidaciju do 1800 ° F
Otpornost na morsku vodu i šupljine protiv korozije
Imuni na kloridno pukotinsko koronsko pucanje

U kojim se aplikacijama koristi Inconel 625?

Sistemi za kanalizaciju u avionima
Ispušni sustavi motora
Sistemi povratnog potiska motora
Specijalizirana oprema za morsku vodu
Oprema za hemijske procese

Fabrication with Inconel 625

Alloy 625 has excellent forming and welding characteristics. It may be forged or hot worked providing temperature is maintained in the range of about 1800-2150° F. Ideally, to control grain size, finish hot working operations should be performed at the lower end of the temperature range. Because of its good ductility, alloy 625 is also readily formed by cold working. However, the alloy does work-harden rapidly so intermediate annealing treatments may be needed for complex component forming operations. In order to restore the best balance of properties, all hot or cold worked parts should be annealed and rapidly cooled. This nickel alloy can be welded by both manual and automatic welding methods, including gas tungsten arc, gas metal arc, electron beam and resistance welding. It exhibits good restraint welding characteristics.